This Report
This report contains a record of data from your test. Each section contains explanations to help you understand the contents.

Workload Generator Profile:

Workload Generator System: TOSHIBA1
Operating System: Windows NT 4.0
Logged in as: Administrator
MailSizr licensed to: Test User, Technovations
This report generated on: 10/20/00 10:30:15 PM

General Comments/Executive Summary:

MailSizr demo report.

Test Results: The following table shows the various operations that were performed against the test target. Each operation is an atomic measure which represents a unit of work. The first column of the table shows the type of operation that was performed, and the rest of the table shows statistical data associated with that operation. The table shows the total number of operations, Response Time and Throughput data. Here are some simple definitions of Response Time and Throughput. Response Time is the end to end elapsed time for an operation to complete, and Throughput is the number of operations that could be performed per unit of time. Response time is a good indicator of how FAST a server (or Test Target) is from a end user perspective, while Throughput is an indicator of the volume of work that can be performed simultaneously by the server. Both of these metrics are important. The following table also shows the variability of Response Times during the experiment using Standard Deviation about the mean, along with a presentation of data points which show operations which took the least Response Time (Min), the most time (Max) and the time taken by the last operation (Last).

HTTP Op Type No. of Ops Avg. Rate (Msgs/Min) Avg. Latency (ms) Std. Deviation (ms) Min. (ms) Max. (ms) Last (ms)
POP 127 33.74 229.88 511.13 110 3015 111
SMTP 300 79.7 4003.6 2136.21 451 10655 3685
All 427 113.44 2881.21

Contents of this Report This report contains several sections which document test configuration and output details. These parameters can be used to analyze the test to any level of detail. It also provides an opportunity to reproduce tests at a later point of time.

Completion Time Summary This section shows the breakdown in response times for this test. The time intervals specified are defined as part of test setup. This section readily shows how different Quality Of Service (QOS) criteria were met under these simulation conditions. This data can also be used to understand the response time that you may see in a production environment under load conditions simulated by this test.

Number of Requests completed within 50000 millisecs : 427
Number of Requests completed within 45000 millisecs : 427
Number of Requests completed within 40000 millisecs : 427
Number of Requests completed within 35000 millisecs : 427
Number of Requests completed within 30000 millisecs : 427

Test Characteristics Following are some basic run-time summaries of this simulation. This shows the amount of time spent during different stages of the test. It also presents an overall count of the number of test errors that were encountered during the test.

Test WarmUp Time : 0.44 Secs.
Test RampUp Time : 0.28 Secs.
Test Steady State : 227.64 Secs.
Test RampDown Time : 0.00 Secs.
Error Count: 19

Test Configuration Summary This section documents the number of users simulated (or specified to simulate), a summary of test settings that were configured using test setup, Acceptance criteria definitions, script file(s) used for the test, server configuration details.

Simultaneous User Sessions = 10

Test Settings file This Documents the settings file (SIZR.INI). To reproduce these settings, you can simply cut this part of the report and paste it into (as) the SIZR.INI file.

This Simulator instance is a Standalone Workload generator
ResultDataLogOnly 0
ScreenFileName MSIZR
PageLength 100000
FromDomain technovations.com
LogToSeparateFiles 0
StartStats 0
EndStats 0
IgnoreErrors 1
WaitUntilRampup 0
IgnorePauses 1
SeparateScripts 0
StatsStartTime 0
StatsEndTime 0
ScriptPrefix USER
ScriptAssign 0
StopMode 0
Assignfile ASSIGN.TXT
scriptPattern RANDSCR.TXT
maillisttextfile MAILLIST.TXT
Desynch 0
enableRunFor 0
rateDef 0
ulimit 40
llimit 20
runFor 1200
Timeout 60000

Acceptance Criteria Definitions: These are definition of Acceptance criteria that were part of test setup.

99.00% of Ops have to complete with Latency Less Than 50000 MilliSeconds
95.00% of Ops have to complete with Latency Less Than 45000 MilliSeconds
90.00% of Ops have to complete with Latency Less Than 40000 MilliSeconds
85.00% of Ops have to complete with Latency Less Than 35000 MilliSeconds
80.00% of Ops have to complete with Latency Less Than 30000 MilliSeconds
ScriptFile used for Test

! MAILSIZR Sample Script
! Copyright 1998 by Technovations
Inc
! Lexington MA 02420
! http://www.technovations.com
! Please direct sales inquiries to sales@technovations.com
! This script shows the scripting capabilities of MailSizr
!


! pause randomly in the beginning to desynch users manually.

pause 1 20

! send a message to a specific user "joe_schmoe@technovations.com"

smtp 25 smtp.harvard.net body.txt subject.txt joe_schmoe@technovations.com

! pause randomly for anywhere between 10 and 35 seconds
! this signifies user think time.

pause 20 40

! send another message to a specific user "joe_schmoe@technovations.com"

smtp 25 smtp.harvard.net body.txt subject.txt joe_schmoe@technovations.com

! replay all requests following the rewind 50 times.

rewind 50

! pause randomly to reflect think time between iterations

pause 0 10

! check messages on the server and delete retrieved messages.

pnd 110 pop.technovations.com

! pause randomly to reflect think time

pause 10 30

! send another message for this iteration

smtp 25 smtp.harvard.net body.txt subject.txt joe_schmoe@technovations.com

pause 10 20

smtp 25 smtp.harvard.net size=30000 subject.txt joe_schmoe@technovations.com
User Credentials This section contains the usernames and passwords used for this test. Hint - You can cut and paste this entire section into the credentials file to use these settings for future tests.

User_1 muser1 password
User_2 muser2 password
User_3 muser3 password
User_4 muser4 password
User_5 muser5 password
User_6 muser6 password
User_7 muser7 password
User_8 muser8 password
User_9 muser9 password
User_10 muser10 password
Logfile from Test This section documents the logfile from the test. This logfile has details of every operation that was performed during this experiment. These details can be used to analyze the data to any level of detail or simply to produce scatter graphs by importing to a standard spreadsheet program.

! MailSizr Pro

! Copyright 1997-2000 by Technovations Inc

! http://www.Technovations.com

New test started at Fri Oct 20 22:17:55 2000

Time:2063 USER#:7 RT:1973ms OP:SMTP

Time:2093 USER#:4 RT:1913ms OP:SMTP

Time:2093 USER#:6 RT:1993ms OP:SMTP

Time:2103 USER#:4 RT:1943ms OP:SMTP

Time:2123 USER#:1 RT:1863ms OP:SMTP

Time:2123 USER#:7 RT:2033ms OP:SMTP

Time:2133 USER#:7 RT:2043ms OP:SMTP

Time:2143 USER#:10 RT:2133ms OP:SMTP

Time:2153 USER#:2 RT:1923ms OP:SMTP

Time:2163 USER#:3 RT:1953ms OP:SMTP

Time:2874 USER#:7 RT:811ms OP:SMTP

Time:2964 USER#:4 RT:871ms OP:SMTP

Time:3054 USER#:6 RT:961ms OP:SMTP

Time:3174 USER#:4 RT:1071ms OP:SMTP

Time:3184 USER#:1 RT:1061ms OP:SMTP

Time:3274 USER#:7 RT:1151ms OP:SMTP

Time:3465 USER#:7 RT:1332ms OP:SMTP

Time:3485 USER#:2 RT:1332ms OP:SMTP

Time:3495 USER#:10 RT:1352ms OP:SMTP

Time:3535 USER#:3 RT:1372ms OP:SMTP

Time:13028 USER#:7 RT:550ms OP:SMTP

Time:14510 USER#:7 RT:1482ms OP:SMTP

Time:15842 USER#:7 RT:500ms OP:SMTP

Time:194359 USER#:7 RT:6429ms OP:SMTP

Time:194499 USER#:7 RT:140ms OP:POP3-read

Time:195270 USER#:1 RT:5027ms OP:SMTP

Time:195661 USER#:7 RT:6029ms OP:SMTP

Time:195761 USER#:10 RT:5057ms OP:SMTP

Time:195771 USER#:7 RT:110ms OP:POP3-read

Time:197063 USER#:2 RT:6099ms OP:SMTP

Time:197083 USER#:4 RT:4577ms OP:SMTP

Time:197173 USER#:2 RT:110ms OP:POP3-read

Time:198355 USER#:7 RT:3856ms OP:SMTP

Time:198675 USER#:6 RT:10325ms OP:SMTP

Time:198785 USER#:6 RT:110ms OP:POP3-read

Time:199256 USER#:3 RT:5718ms OP:SMTP

Time:199386 USER#:3 RT:110ms OP:POP3-read

Time:199957 USER#:1 RT:4687ms OP:SMTP

Time:200067 USER#:1 RT:110ms OP:POP3-read

Time:200338 USER#:7 RT:4567ms OP:SMTP

Time:201369 USER#:10 RT:5608ms OP:SMTP

Time:201479 USER#:10 RT:110ms OP:POP3-read

Time:201860 USER#:2 RT:4687ms OP:SMTP

Time:203302 USER#:6 RT:4517ms OP:SMTP

Time:203522 USER#:4 RT:6439ms OP:SMTP

Time:203632 USER#:4 RT:110ms OP:POP3-read

Time:203773 USER#:7 RT:5418ms OP:SMTP

Time:203883 USER#:7 RT:110ms OP:POP3-read

Time:203923 USER#:3 RT:4537ms OP:SMTP

Time:204233 USER#:1 RT:4166ms OP:SMTP

Time:205275 USER#:10 RT:3796ms OP:SMTP

Time:205685 USER#:7 RT:5347ms OP:SMTP

Time:205795 USER#:7 RT:110ms OP:POP3-read

Time:207017 USER#:2 RT:5157ms OP:SMTP

Time:207147 USER#:2 RT:130ms OP:POP3-read

Time:207558 USER#:4 RT:3926ms OP:SMTP

Time:208349 USER#:7 RT:4466ms OP:SMTP

Time:208509 USER#:6 RT:5207ms OP:SMTP

Time:208620 USER#:6 RT:111ms OP:POP3-read

Time:210422 USER#:3 RT:6499ms OP:SMTP

Time:210532 USER#:3 RT:110ms OP:POP3-read

Time:211374 USER#:1 RT:7141ms OP:SMTP

Time:211384 USER#:7 RT:5589ms OP:SMTP

Time:211484 USER#:1 RT:110ms OP:POP3-read

Time:211774 USER#:4 RT:5708ms OP:SMTP

Time:211854 USER#:10 RT:6579ms OP:SMTP

Time:211964 USER#:10 RT:110ms OP:POP3-read

Time:212365 USER#:2 RT:5218ms OP:SMTP

Time:213737 USER#:6 RT:5117ms OP:SMTP

Time:214047 USER#:4 RT:6489ms OP:SMTP

Time:214077 USER#:7 RT:4576ms OP:SMTP

Time:214158 USER#:4 RT:111ms OP:POP3-read

Time:214218 USER#:7 RT:5869ms OP:SMTP

Time:214328 USER#:7 RT:110ms OP:POP3-read

Time:214398 USER#:3 RT:3866ms OP:SMTP

Time:214808 USER#:1 RT:3324ms OP:SMTP

Time:216831 USER#:7 RT:5447ms OP:SMTP

Time:216851 USER#:10 RT:4877ms OP:SMTP

Time:217172 USER#:7 RT:341ms OP:POP3-read

Time:218043 USER#:4 RT:6269ms OP:SMTP

Time:218153 USER#:4 RT:110ms OP:POP3-read

Time:219175 USER#:2 RT:6810ms OP:SMTP

Time:219305 USER#:2 RT:130ms OP:POP3-read

Time:219776 USER#:4 RT:5618ms OP:SMTP

Time:219906 USER#:7 RT:5829ms OP:SMTP

Time:220016 USER#:7 RT:110ms OP:POP3-read

Time:220557 USER#:6 RT:6820ms OP:SMTP

Time:220667 USER#:6 RT:110ms OP:POP3-read

Time:220717 USER#:7 RT:6389ms OP:SMTP

Time:222409 USER#:3 RT:8011ms OP:SMTP

Time:222520 USER#:3 RT:111ms OP:POP3-read

Time:222730 USER#:1 RT:7922ms OP:SMTP

Time:222840 USER#:1 RT:110ms OP:POP3-read

Time:223791 USER#:10 RT:6940ms OP:SMTP

Time:223902 USER#:10 RT:111ms OP:POP3-read

Time:224182 USER#:2 RT:4877ms OP:SMTP

Time:224252 USER#:7 RT:4236ms OP:SMTP

Time:225223 USER#:7 RT:8051ms OP:SMTP

Time:225594 USER#:6 RT:4927ms OP:SMTP

Time:226065 USER#:4 RT:6289ms OP:SMTP

Time:226075 USER#:4 RT:7922ms OP:SMTP

Time:226175 USER#:4 RT:110ms OP:POP3-read

Time:226535 USER#:3 RT:4005ms OP:SMTP

Time:226645 USER#:7 RT:5928ms OP:SMTP

Time:226726 USER#:1 RT:3886ms OP:SMTP

Time:226756 USER#:7 RT:111ms OP:POP3-read

Time:227587 USER#:10 RT:3685ms OP:SMTP

Test ended at Fri Oct 20 22:21:44 2000

ErrorLog from Test This section logs any and all errors encountered during the test. Many of these errors are application specific and should be self explantory. 

Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket
Error reading from socket



MailSizr was stopped prematurely during this test.

You have chosen hard Termination as your
default stop mode.