This Report
This report contains a record of data from your test. Each section contains explanations to help you understand the contents.

Workload Generator Profile:

Workload Generator System: TOSHIBA1
Operating System: Windows NT 4.0
Logged in as: Administrator
WebSizr licensed to: Test User, Technovations
This report generated on: 9/18/00 2:41:00 AM

General Comments/Executive Summary:

Demo test of WebSizr 2000

Test Results: The following table shows the various operations that were performed against the test target. Each operation is an atomic measure which represents a unit of work. The first column of the table shows the type of operation that was performed, and the rest of the table shows statistical data associated with that operation. The table shows the total number of operations, Response Time and Throughput data. Here are some simple definitions of Response Time and Throughput. Response Time is the end to end elapsed time for an operation to complete, and Throughput is the number of operations that could be performed per unit of time. Response time is a good indicator of how FAST a server (or Test Target) is from a end user perspective, while Throughput is an indicator of the volume of work that can be performed simultaneously by the server. Both of these metrics are important. The following table also shows the variability of Response Times during the experiment using Standard Deviation about the mean, along with a presentation of data points which show operations which took the least Response Time (Min), the most time (Max) and the time taken by the last operation (Last).

HTTP Op Type No. of Ops Avg. Rate (URLs/Min) Avg. Latency (ms) Std. Deviation (ms) Min. (ms) Max. (ms) Last (ms)
GET 13093 1170.87 126.59 102.49 110 2213 110
All 13093 1170.87 126.59

Contents of this Report This report contains several sections which document test configuration and output details. These parameters can be used to analyze the test to any level of detail. It also provides an opportunity to reproduce tests at a later point of time.

Completion Time Summary This section shows the breakdown in Response Times for this test. The time intervals specified are defined as part of test setup. This section readily shows how different Quality Of Service (QOS) criteria were met under these simulation conditions. This data can also be used to understand the Response Time that you may see in a production environment under load conditions simulated by this test.

Number of Requests completed within 50000 millisecs : 13093
Number of Requests completed within 45000 millisecs : 13093
Number of Requests completed within 40000 millisecs : 13093
Number of Requests completed within 35000 millisecs : 13093
Number of Requests completed within 30000 millisecs : 13093

Test Characteristics Following are some basic run-time summaries of this simulation. This shows the amount of time spent during different stages of the test. It also presents an overall count of the number of test errors that were encountered during the test.

Test WarmUp Time : 1.27 Secs.
Test RampUp Time : 228.83 Secs.
Test Steady State : 444.39 Secs.
Test RampDown Time : 0.00 Secs.
Error Count: 0

Test Configuration Summary This section documents the number of users simulated (or specified to simulate), a summary of test settings that were configured using test setup, Acceptance criteria definitions, script file(s) used for the test, server configuration details.

Simultaneous User Sessions = 200

Test Settings file This Documents the settings file (SIZR.INI). To reproduce these settings, you can simply cut this part of the report and paste it into (as) the SIZR.INI file.

This Simulator instance is a Standalone Workload generator
ProxyServer www-proxy.technovations.com
ProxyPort 80
AgentName Technovations TechPerf/2.0
UseProxyServer 0
ResultDataLogOnly 1
ScreenFileName WSIZR
PageLength 15000
NetworkBuffer 8192
UseCookies 0
FollowRedirects 1
LogToSeparateFiles 0
SaveCookies 0
StartStats 0
EndStats 0
IgnoreErrors 1
IllegalSubst 0
DynHandling 1
WaitUntilRampup 0
IgnorePauses 0
SeparateScripts 0
StatsStartTime 0
StatsEndTime 0
ScriptPrefix USER
ScriptAssign 0
StopMode 0
Assignfile ASSIGN.TXT
scriptContainer RANDSCR.TXT
urlfile URLFILE.TXT
payloadfile PAYLOAD.TXT
Desynch 1
enableRunFor 0
rateDef 0
ulimit 20
llimit 20
runFor 1200
Timeout 60000

Acceptance Criteria Definitions: These are definition of Acceptance criteria that were part of test setup.

99% of Ops have to complete with Latency Less Than 50000 MilliSeconds
95% of Ops have to complete with Latency Less Than 45000 MilliSeconds
90% of Ops have to complete with Latency Less Than 40000 MilliSeconds
85% of Ops have to complete with Latency Less Than 35000 MilliSeconds
80% of Ops have to complete with Latency Less Than 30000 MilliSeconds
ScriptFile used for Test

rewind 1000
get 1 http://test.technovations.com/
pause 7 10
User Credentials This section contains the usernames and passwords used for this test. Hint - You can cut and paste this entire section into the credentials file to use these settings for future tests.

User_1 user1 password1 par41 par51 par61 par71 par81 par91 par101 par111 par121 par131 par141 par151 par161 par171 par181 par191 par201
User_2 user2 password2 par42 par52 par62 par72 par82 par92 par102 par112 par122 par132 par142 par152 par162 par172 par182 par192 par202
Logfile from Test This section documents the logfile from the test. This logfile has details of every operation that was performed during this experiment. These details can be used to analyze the data to any level of detail or simply to produce scatter graphs by importing to a standard spreadsheet program.

! WEBSIZR Pro

! Copyright 1997-2000 by Technovations Inc

! http://www.Technovations.com

New test started at Mon Sep 18 02:23:29 2000

Time:2283 USER#:200 RT:2213ms OP:GET URL=http://test.technovations.com:80/

Time:2293 USER#:199 RT:590ms OP:GET URL=http://test.technovations.com:80/

Time:2293 USER#:198 RT:340ms OP:GET URL=http://test.technovations.com:80/

Time:2964 USER#:197 RT:120ms OP:GET URL=http://test.technovations.com:80/

RT:110ms OP:GET URL=http://test.technovations.com:80/

Time:672307 USER#:162 RT:8002ms OP:PAU

Time:672347 USER#:200 RT:10004ms OP:PAU

Time:672347 USER#:83 RT:8002ms OP:PAU

Time:672397 USER#:145 RT:9003ms OP:PAU

Time:672587 USER#:62 RT:8001ms OP:PAU

Time:672657 USER#:48 RT:8001ms OP:PAU

Time:672677 USER#:34 RT:8001ms OP:PAU

Time:672707 USER#:195 RT:10004ms OP:PAU

Time:672718 USER#:131 RT:7001ms OP:PAU

Time:672768 USER#:99 RT:9003ms OP:PAU

Time:672818 USER#:7 RT:9003ms OP:PAU

Time:672818 USER#:32 RT:7000ms OP:PAU

Time:672838 USER#:168 RT:10005ms OP:PAU

Time:672838 USER#:66 RT:8002ms OP:PAU

Time:672838 USER#:22 RT:7000ms OP:PAU

Time:672878 USER#:98 RT:9003ms OP:PAU

Time:672898 USER#:71 RT:9003ms OP:PAU

Time:672938 USER#:119 RT:10005ms OP:PAU

Time:673038 USER#:33 RT:9003ms OP:PAU

Time:673038 USER#:110 RT:7000ms OP:PAU

Time:673228 USER#:46 RT:9003ms OP:PAU

Time:673228 USER#:12 RT:9003ms OP:PAU

Time:673238 USER#:3 RT:10004ms OP:PAU

Time:673308 USER#:21 RT:7000ms OP:PAU

Time:673419 USER#:87 RT:9003ms OP:PAU

Time:673559 USER#:127 RT:9003ms OP:PAU

Time:673629 USER#:194 RT:9003ms OP:PAU

Time:673669 USER#:25 RT:9003ms OP:PAU

Time:673759 USER#:39 RT:9003ms OP:PAU

Test ended at Mon Sep 18 02:34:44 2000

ErrorLog from Test This section logs any and all errors encountered during the test. Many of these errors are application specific and should be self explantory. 




WebSizr was stopped prematurely during this test.

You have chosen hard Termination as your
default stop mode.